Menu
STMicro could enable touchless gesture control of smartphones

STMicro could enable touchless gesture control of smartphones

Touchless swipes, taps and double-taps can all be identified by STMicro's 'time-of-flight' proximity detector

Using an infrared laser, ST Microelectronics' new proximity detector for mobile phones can measure distances to within a centimeter or two.

The component could enable future smartphones to repond to more sophisticated touchless commands, distinguishing between as many as eight simple hand gestures, said company representatives on the STMicro stand at Mobile World Congress.

Traditional proximity detectors contain a sensor that detects when a beam of infrared light from an adjacent LED is reflected off a nearby object. While the intensity of the reflected light can give some information about the proximity of the object, this can also be affected by the object's color or surface finish. Typically, they are placed next to the phone's earpiece or front-facing camera.

Software running on a demo phone showed a traditional detector responding strongly to objects within about 5 cm, but barely reacting beyond that. The same app also showed the new detector's response varying proportionally with the distance to an obstacle, out to about 50 cm.

The new detector is much more precise because it calculates the time of flight of individual photons emitted by an infrared laser and reflected back to a sensor consisting of a single-photon avalanche diode (SPAD), said STMicro representative Hervé Grotard. He declined to explain exactly how the component measures the flight time, saying only that it was done by performing statistical calculations on a number of results gathered over time. Its power consumption will be equivalent to that of existing, less precise components, he said.

His colleague Jocelyn Leheup demonstrated how the detector can distinguish between gestures. Moving a hand in close towards a demo phone's screen and then briskly backing away again prompted an app to display a symbol representing a tap. Performing the same gesture twice in succession triggered the symbol for a double tap. Passing a hand from one side of the screen to the other, 10 or 20 cm in front of it, triggered a swipe symbol, while the same gesture from side to side and back was detected as a double swipe. The detector did not distinguish between left-to-right and right-to-left movements, however.

Leheup also showed how an app could distinguish between the broad obstacle of a swipe with all fingers extended, the narrow obstacle of a single finger extended, and the fluctuation in distance when two fingers extended in a V are swiped in front of the sensor. In all an app could distinguish between as many as eight gestures, he said.

The new detector could even be used to help phone cameras autofocus in macro mode, suggested Leheup.

Grotard also pointed to the cosmetic advantages for phone manufacturers. Traditional detectors require two unsightly apertures in the front of the phone, one for light leaving the LED and the other for its return to the sensor. The infrared laser's beam being much narrower, and the SPAD being more sensitive, the holes can be much smaller with the new detector, and the laser and sensor are small enough to be concealed behind the earphone grill if desired, he said.

Samples of the component are already available, and Grotard said he expects the first phones using it on the market in May.

Peter Sayer covers open source software, European intellectual property legislation and general technology breaking news for IDG News Service. Send comments and news tips to Peter at peter_sayer@idg.com.


Follow Us

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.

Tags ComponentsMWCST Microelectronics

Brand Post

How to become the best IT MSP

This article provides guidance for managed service providers (MSPs) that want to grow their business. It is also useful for any IT service provider looking to move from the break-fix model to managed IT services.

Featured

Slideshows

Reseller News Platinum Club celebrates leading partners in 2019

Reseller News Platinum Club celebrates leading partners in 2019

The leading players of the New Zealand channel came together to celebrate a year of achievement at the annual Reseller News Platinum Club lunch in Auckland. Following the Reseller News Innovation Awards, Platinum Club provides a platform to showcase the top performing partners and start-ups of the past 12 months.

Reseller News Platinum Club celebrates leading partners in 2019
Reseller News hosts alumnae breakfast for Women in ICT Awards

Reseller News hosts alumnae breakfast for Women in ICT Awards

Reseller News hosted its second annual alumnae breakfast for the Women in ICT Awards in New Zealand, designed to showcase the leading female leaders in the industry. Held at The Cordis in Auckland, attendees came together to hear inspiring keynotes and panel discussions, alongside high-level networking among peers. Photos by Gino Demeer.

Reseller News hosts alumnae breakfast for Women in ICT Awards
Reseller News Innovation Awards 2019: meet the winners

Reseller News Innovation Awards 2019: meet the winners

Reseller News honoured the standout players of the New Zealand channel in front of more than 480 technology leaders in Auckland on 23 October, recognising the achievements of top partners, emerging entrants and innovative start-ups.

Reseller News Innovation Awards 2019: meet the winners
Show Comments