Menu
Making wearable devices gets easier with Freescale's Warp development kit

Making wearable devices gets easier with Freescale's Warp development kit

Freescale's mini-computer called Warp allows DIYers and device makers prototype wearable devices

Freescale's Warp wearable development kit

Freescale's Warp wearable development kit

Freescale Semiconductor wants users to develop and test their own wearable devices with a mini-computer.

With the Warp development kit, users can make smart glasses, smart watches, pedometers, health monitors and other wearable devices, the company said Monday. The Warp includes a small uncased computer, which is slightly larger than a dime, through which wearable devices can be developed and tested before release.

The kit is targeted at the do-it-yourself community and device makers looking to prototype and develop products, Freescale said.

"Companies can use this platform as a basis for their own wearable product and invest their resources into innovation and differentiation instead," said Robert Thompson, director of consumer business development for microcontrollers at Freescale.

The Warp -- which stands for "wearable reference platform" -- is like a miniature version of the Raspberry Pi, an uncased Linux-based computer the size of a credit card. But with features like wireless charging, the Freescale computer is tuned for low-power wearable devices that have wireless connectivity and can be worn around the body. The Raspberry Pi is more for robots, PCs, smartphones and tablets.

"[Warp] provides the building blocks ... that addresses the key challenges seen by wearable device manufacturers -- connectivity, battery life, miniaturization, and usability," Thompson said.

Warp has the key wireless, memory and throughput components incorporated on the main board or expansion cards. But at US$149, it could be deemed much more expensive than the Raspberry Pi, which is priced from $25 to $35.

"Raspberry Pi is a great board, but if a developer wants to develop a product based on its key components, they are either not available for purchase or available at greatly inflated prices compared to the $35 cost of Raspberry Pi," Thompson said.

The wearable market is growing at a swift rate, and is viewed as an emerging business opportunity for device and chip makers. Gartner last month forecast revenue from wearable electronics, apps and services for fitness and personal health to reach $5 billion in 2016, increasing from $1.6 billion in 2013.

The development kit was announced ahead of this week's International CES, where wearable devices are expected to dominate the floor. Products on display will include health monitors, smart glasses for augmented reality, clothes with sensors, and smartwatches that work with smartphones to provide messages, call notifications, news and weather information.

An important element in wearable devices is connectivity, and the Warp supports Bluetooth and 802.11 Wi-Fi. It does not support Zigbee, which is used by a wide number of sensor arrays to communicate. Warp also has LCD and E-ink display interfaces, USB, power management features and sensors such as accelerometers and magnetometers. The mini-computer is expandable through add-on cards -- also called daughter cards -- through which other wearable devices like health monitors can be made and tested.

"We currently have two other daughter cards in planning for launch in 2014 that will enable other usage models including ECG and continuous heart rate monitoring," Thompson said.

By exploring new usage models, the Warp community will also help in the development of expansion cards, Thompson said.

The board has a Freescale single-core i.MX 6SoloLite processor based on the ARM Cortex-A9 processor core design. It has 2D graphics capabilities, and draws minimal power. The i.MX 6SoloLite chip supports external 32-bit LPDDR2 memory or low-voltage DDR3 memory. It also supports Ethernet inputs and SD cards.

Warp comes with Android 4.3 OS and a related software development kit. The hardware is open-source, and the company will publish the schematics of the board for others to replicate and manufacture.

"We are following the Open Source Hardware Association best practices. We will also publish a complete open source version of Android 4.3 with limited functionality," Thompson said.

Warp is a result of a collaboration between Freescale, software company Kynetics and robotics company Revolution Robotics, Freescale said.

Agam Shah covers PCs, tablets, servers, chips and semiconductors for IDG News Service. Follow Agam on Twitter at @agamsh. Agam's e-mail address is agam_shah@idg.com


Follow Us

Join the newsletter!

Error: Please check your email address.

Tags CESconsumer electronicsFreescale SemiconductorComponentsprocessorsMotherboards

Featured

Slideshows

Tech industry comes together as Lexel celebrates turning 30

Tech industry comes together as Lexel celebrates turning 30

Leading figures within the technology industry across New Zealand came together to celebrate 30 years of success for Lexel Systems, at a milestone birthday occasion at St Matthews in the City.​

Tech industry comes together as Lexel celebrates turning 30
HP re-imagines education through Auckland event launch

HP re-imagines education through Auckland event launch

HP New Zealand held an inaugural Evolve Education event at Aotea Centre in Auckland, welcoming over 70 principals, teachers and education experts to explore ways of shaping and enhancing learning using technology.

HP re-imagines education through Auckland event launch
Reseller News ICT Industry Awards 2017 - Meet the winners...

Reseller News ICT Industry Awards 2017 - Meet the winners...

Reseller News honoured the industry’s finest on a standout evening for the New Zealand channel, recognising the achievements of established and emerging partners on a memorable night in Auckland.

Reseller News ICT Industry Awards 2017 - Meet the winners...
Show Comments