Menu
The trouble-free way to deploy VTLs

The trouble-free way to deploy VTLs

The trouble-free way to deploy VTLs

US

Virtual tape libraries have become a popular storage topic for IBM mainframes as well as Linux, Unix and Windows environments. VTLs are a building block for deploying tiered storage as well as to support disk-to-disk data protection (3DP) including backup, archiving, compliance retention, business continuance and disaster recovery. Among other things, VTLs enable and provide the following:

- Improved performance of backup, restore, archiving and other tape-based processing

- Reduced or eliminated manual handling of tape or optical media

- Coexistence with existing backup and archiving software, procedures and policies

- A phased transition from tape to disk-based processing with minimum disruption.

So let's spend a few minutes and look at some issues, problems and hurdles to be aware of when deploying a VTL solution to avoid surprises. VTLs are available from many different vendors in a variety of products and feature sets. Some are positioned as software based, while others are more encompassing solutions combing hardware, software, storage and management tools and services. Keep in mind the following things to avoid problems and surprises with VTL deployments:

1. If the VTL system is being sold or marketed as a software product, you should consider where the software will run and who supplies and integrates the server, software and storage, as well as provides ongoing support.

2. What happens when the VTL becomes full or runs out of capacity? While a VTL provides virtual tape emulation, I'm not aware of any VTLs yet (besides in architecture slides) that provide unlimited real-world virtual capacity, although I'm aware of several products that have exceptional scaling capabilities to dynamically add storage. Likewise, there are vendors that can proactively manage and reduce the amount of storage including leveraging differencing, compaction, factoring, deduplication and singe-instance image capabilities.

3. Some VTLs provide extensive interoperability and emulation capabilities to coexist with existing software configurations and settings. Look into what emulation is provided by a VTL as well as how extensive and robust the emulation is compared with your needs and requirements. Keep in mind that some of your applications or procedures may have hard-coded references that may prove 'sticky' and thus need to be accounted for and addressed.

4. How will you be using your VTL — will you be using it primarily as a large disk buffer and staging pool with as much data as possible kept on disk, or will you look to actively leverage tape and move data off disk as soon as possible?

5. What format and how accessible is the data once it is stored on a VTL? Is the data stored as a file representing a tar ball or proprietary backup save set format, or is it stored in a format that lends itself to rapid access? For example, some vendors create relative smaller container files, while others more closely map and mirror to a one-to-one correlation between physical and virtual tapes.

6. What's involved in making a clone copy of a virtual tape along with exporting or moving a virtual tape to a physical tape for storage or transport, and what audit trails and logs exist?

7. Will any special host software or agents have to be installed, and what if any changes need to be made to your monitoring and notification systems? If you have not already done so, look into backup and data protection monitoring and analysis tools such as those from Aptare, Bocada and WysDM Software to help gauge how your backups are performing.

8. Who has access to and can allocate virtual tapes, virtual tape drives and libraries?

9. How are firmware and software updates handled, and what are software maintenance fees?

10. How fast can a job access a particular file, and can multiple streams access the same virtual tape?

A premise of VTLs is to emulate and coexist with existing software and procedures including backup scripts to mask complexity of underlying hardware and software. Hence, the move to a VTL system should seamlessly integrate into your environment, with the fewer disruptions and changes the better. However, having said that, identify what and where you may have ‘sticky’ points in your environment for future consideration, or address those points now. Sticky points include custom scripts or application-specific linkages to hardware and software that inhibit your ability to leverage new technologies resulting in additional complexity. Keep the following ten questions in mind when considering VTLs for deployment into your environment.

1. How does a VTL integrate into your business continuity and disaster recovery plans locally as well as at a remote hot or cold site?

2. What storage devices do you want or need to be attached by the VTL?

3. How much storage capacity will you need in the future, and how will the VTL support that growth?

4. What backup, archiving, compliance and other data-protection software is supported by the VTL?

5. Can the VTL support some form of differencing or single-instance repository capabilities?

6. Will you perform the integration of hardware and software, or are you looking for a turnkey solution?

7. What level of redundancy and resiliency do you need in a VTL solution, and are upgrades disruptive?

8. Do you need advanced security capabilities, including encryption of virtual tapes?

9. What tape device and tape library emulation do you need supported for your environment?

10. What changes will be needed to your environment's software, procedures and polices to use a VTL?

VTLs combine virtualisation (emulation) and disk-based backup to address various needs. When the most applicable solution for your requirements is properly implemented, it can provide many benefits to your organisation. Proper planning and working closely with vendors and/or business partners can reduce the number of surprises and disruptions associated with deploying a VTL into your environment. As with any technology, virtualisation should work for you, not the other way around, so it should not increase your workload or add complexity.

Greg Schulz is founder and senior analyst of the StorageIO group and author of Resilient Storage Networks (Digital Press, 2004).


Follow Us

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.

Tags Marketwatch

Brand Post

What to expect from your IT Distributor

Whether you’re just starting out or you’ve been around since before the dot com rollercoaster, choosing the right distribution partner can be a pivotal factor in your success. This definitive guide outlines the traits that every IT partner needs to look for in their IT Distributor.

Featured

Slideshows

Meet the Reseller News 30 Under 30 Tech Awards 2020 winners

Meet the Reseller News 30 Under 30 Tech Awards 2020 winners

This year’s Reseller News 30 Under 30 Tech Awards were held as an integral part of the first entirely virtual Emerging Leaders​ forum, an annual event dedicated to identifying, educating and showcasing the New Zealand technology market’s rising stars. The 30 Under 30 Tech Awards 2020 recognised the outstanding achievements and business excellence of 30 talented individuals​, across both young leaders and those just starting out. In this slideshow, Reseller News honours this year's winners and captures their thoughts about how their ideas of leadership have changed over time.​

Meet the Reseller News 30 Under 30 Tech Awards 2020 winners
Reseller News Exchange Auckland: Beyond the myths — how partners can master cloud security

Reseller News Exchange Auckland: Beyond the myths — how partners can master cloud security

This exclusive Reseller News Exchange event in Auckland explored the challenges facing the partner community on the cloud security frontier, as well as market trends, customer priorities and how the channel can capitalise on the opportunities available. In association with Arrow, Bitdefender, Exclusive Networks, Fortinet and Palo Alto Networks. Photos by Gino Demeer.

Reseller News Exchange Auckland: Beyond the myths — how partners can master cloud security
Reseller News welcomes industry figures at 2020 Hall of Fame lunch

Reseller News welcomes industry figures at 2020 Hall of Fame lunch

Reseller News welcomed 2019 inductees - Leanne Buer, Ross Jenkins and Terry Dunn - to the fourth running of the Reseller News Hall of Fame lunch, held at the French Cafe in Auckland. The inductees discussed the changing face of the IT channel ecosystem in New Zealand and what it means to be a Reseller News Hall of Fame inductee. Photos by Gino Demeer.

Reseller News welcomes industry figures at 2020 Hall of Fame lunch
Show Comments