Menu
Juniper rolls out backhaul system

Juniper rolls out backhaul system

The Mobile Backhaul Solution is designed to upgrade legacy TDM and ATM backhaul networks for high-bandwidth data services

Juniper Monday introduced a system for scaling mobile backhaul networks.

Juniper's Mobile Backhaul Solution includes a new cell site gateway, circuit emulation aggregation modules for the company's M-series routers, and enhancements to its JUNOScope network management system.

The Mobile Backhaul Solution is designed to upgrade legacy TDM and ATM backhaul networks for high-bandwidth data services. Mobile operators are increasingly investing in packet backhaul to reduce the cost per bit, as well as scaling the backhaul to support the rapid uptake of the mobile data services, Juniper says, citing data for Infonetics.

Operators and mobile backhaul transport providers invested US$4.5 billion in backhaul equipment in 2007, according to Infonetics, which projects the market to grow to US$8.2 billion in 2010, with IP/MPLS/Ethernet packet equipment growing fastest.

Juniper's addressing that opportunity with the BX 7000 Multi-Access Gateway. The BX 7000 transports a range of backhaul service types -- TDM, ATM and Ethernet -- over an IP/MPLS connection using MPLS pseudowires.

The BX 7000 is designed to allow mobile operators to retain their existing investments in 2G and 3G cell sites, while migrating to an IP/MPLS-based transport. Services can be migrated gradually, for example, by offloading data transport as a first step, Juniper says.

The BX 7000 also includes a timing expansion module that allows customers to replace clocking and synchronization systems as they change technologies. The BX 7000 also provides an expansion slot for a variety of backhaul network uplinks.

The circuit emulation interface cards for the M-series routers allows operators to deploy them as aggregation site gateways. They include a 12-port T-1/E-1 card and a four-port OC-3/STM-1 module.

The software enhancements to the JUNOScope management system are designed to simplify the deployment, provisioning and management of mobile backhaul networks.

The software automatically configures the BX 7000 upon installation, Juniper says. JUNOScope enhancements also perform monitoring and diagnostics; remote software upgrades; configuration management; and inventory management across all of Juniper's mobile backhaul products, the company says.

The BX 7000 and M-series circuit emulation cards are expected to be available in the fourth quarter. Pricing was not disclosed.


Follow Us

Join the newsletter!

Error: Please check your email address.

Featured

Slideshows

HP channel recognised at 2017 Partner Awards

HP channel recognised at 2017 Partner Awards

The HP Partner Awards 2017 at Shed 10 kicked off with an AMD-sponsored hackers lounge, a mysterious gaming style area filled with dry ice and red lasers, the waiters wearing Mr Robot style masks.

HP channel recognised at 2017 Partner Awards
Tech industry comes together as Lexel celebrates turning 30

Tech industry comes together as Lexel celebrates turning 30

Leading figures within the technology industry across New Zealand came together to celebrate 30 years of success for Lexel Systems, at a milestone birthday occasion at St Matthews in the City.​

Tech industry comes together as Lexel celebrates turning 30
HP re-imagines education through Auckland event launch

HP re-imagines education through Auckland event launch

HP New Zealand held an inaugural Evolve Education event at Aotea Centre in Auckland, welcoming over 70 principals, teachers and education experts to explore ways of shaping and enhancing learning using technology.

HP re-imagines education through Auckland event launch
Show Comments