Why the journey to IPv6 is still the road less traveled

Why the journey to IPv6 is still the road less traveled

While enterprises may find it easy, service providers can face a lot of work and few immediate rewards

The American Registry for Internet Numbers gave out IPv6 stickers at its meeting last week in San Francisco.

The American Registry for Internet Numbers gave out IPv6 stickers at its meeting last week in San Francisco.

The writing's on the wall about the short supply of IPv4 addresses, and IPv6 has been around since 1999. Then why does the new protocol still make up just a fraction of the Internet?

Though IPv6 is finished technology that works, rolling it out may be either a simple process or a complicated and risky one, depending on what role you play on the Internet. And the rewards for doing so aren't always obvious. For one thing, making your site or service available via IPv6 only helps the relatively small number of users who are already set up with the protocol, creating a nagging chicken-and-egg problem.

The new protocol, which is expected to provide more addresses than users will ever need, has made deep inroads at some big Internet companies and service providers, especially mobile operators. Yet it still drives less than 10 percent of the world's traffic. This is despite evidence that migrating to IPv6 can simplify networks and even speed up the Web experience.

The good news is that for ordinary enterprises, it can be just a matter of asking your ISP (Internet service provider) or hosting company for IPv6 service. Many of the major ISPs and CDNs (content delivery networks) are equipped to provide both IPv4 and IPv6 connections to a customer's website, allowing partners and potential customers to reach it over the new technology if they have it.

For example, in the US AT&T offers large enterprises native dual-stack connections to its network, allowing users to reach those companies over either IPv4 or IPv6, said Brooks Fitzsimmons, assistant vice president of technology and operations. That's for customers with high-speed connections such as Gigabit Ethernet. For those with slower links, including consumers, AT&T can encapsulate IPv6 traffic for transport over existing IPv4 connections. Many other big service providers also offer such services.

Yet only about 14 percent of the top 1,000 websites have turned on IPv6.

"Many of them haven't enabled it yet because of this perceived notion that it's difficult. It's not. It just takes a little bit of time," said Paul Saab, a software engineer at Facebook, which is fully available over IPv6. "It can be done with a very small team," Saab said.

That's not true for everyone. Saab acknowledged that ISPs have a harder time of it, and some big enterprises that run their own Internet presence may also face challenges. For them, implementing IPv6 can be a complicated effort involving changes to automated processes and other back-end components, judging from war stories told at last week's meeting of ARIN (the American Registry for Internet Numbers). Meanwhile, such projects can slip down the priority list in the face of day-to-day operations and dealing with growth.

"It's a monstrous undertaking by any operator," said analyst Michael Howard of Infonetics Research, a division of IHS. "The protocols might be robust, but this operation is delicate, because it has to be coordinated with all the routers."

An error along the way can do more than slow down service -- it can cut off users' access to a website completely. There are software tools to automate the process, but they couldn't handle every single router, Howard said, as routing code is full of quirky exceptions.

That painstaking effort is why some service providers are waiting to roll out the protocol, he said. In cases where it requires new hardware, they may also be waiting for their current gear to depreciate rather than rip it out early and take a loss. This can take years.

There's a lot of work involved in any project that spans an entire network, AT&T's Fitzsimmons said. In AT&T's case, encapsulating IPv6 in IPv4 allowed the carrier to upgrade most home users' equipment through software updates, but other changes require new hardware.

There are ways around deploying IPv6, even for service providers that don't have enough IPv4 addresses for all their subscribers, but those techniques have limitations. The biggest is carrier-grade NAT (network address translation), a large-scale form of the way home and office networks let users share external addresses.

Instead of connecting directly to a site, subscribers go through a proxy that doles out IPv4 addresses from a limited stockpile. That makes a network more complex and can slow things down. It can also keep an Internet-based service from getting all the information it could, according to John Curran, ARIN's president and CEO. For example, if the proxy that's providing a user's address is located in a different city from that user, then location data that could aid in targeting ads would be unusable, he said.

One barrier to getting an IPv6 deployment going is that it doesn't generate any new revenue -- at least for now. But for service providers, at least, the growth of mobile data and the Internet of Things is liable to change that.

Eventually, it's expected that enterprises and governments deploying millions of sensors, cameras and connected machines will demand so many unique Internet addresses that service providers will only be able to satisfy that demand with IPv6. Holding off will cost them additional business. Howard at Infonetics thinks that day may be just three years away.

AT&T has only recently started to turn on IPv6 on its wireless network, but it believes this is where the technology ultimately will matter most. The carrier reported 19.8 million connected devices in use at the end of last year and expects that to grow quickly with the Internet of Things.

"You can't do that in perpetuity, successfully, without IPv6," Fitzsimmons said.

Stephen Lawson covers mobile, storage and networking technologies for The IDG News Service. Follow Stephen on Twitter at @sdlawsonmedia. Stephen's e-mail address is

Follow Us

Join the New Zealand Reseller News newsletter!

Error: Please check your email address.

Tags at&tNetworkingARINInfonetics ResearchIT managementinternetFacebook



Educating from the epicentre - Why distributors are the pulse checkers of the channel

Educating from the epicentre - Why distributors are the pulse checkers of the channel

​As the channel changes and industry voices deepen, the need for clarity and insight heightens. Market misconceptions talk of an “under pressure” distribution space, with competitors in that fateful “race for relevance” across New Zealand. Amidst the cliched assumptions however, distribution is once again showing its strength, as a force to be listened to, rather than questioned. Traditionally, the role was born out of a need for vendors and resellers to find one another, acting as a bridge between the testing lab and the marketplace. Yet despite new technologies and business approaches shaking the channel to its very core, distributors remain tied to the epicentre - providing the voice of reason amidst a seismic industry shift. In looking across both sides of the vendor and partner fences, the middle concept of the three-tier chain remains centrally placed to understand the metrics of two differing worlds, as the continual pulse checkers of the local channel. This exclusive Reseller News Roundtable, in association with Dicker Data and rhipe, examined the pivotal role of distribution in understanding the health of the channel, educating from the epicentre as the market transforms at a rapid rate.

Educating from the epicentre - Why distributors are the pulse checkers of the channel
Kiwi channel reunites as After Hours kicks off 2017

Kiwi channel reunites as After Hours kicks off 2017

After Hours made a welcome return to the channel social calendar last night, with a bumper crowd of distributors, vendors and resellers descending on The Jefferson in Auckland to kickstart 2017. Photos by Maria Stefina.

Kiwi channel reunites as After Hours kicks off 2017
Arrow exclusively introduces Tenable Network Security to A/NZ channel

Arrow exclusively introduces Tenable Network Security to A/NZ channel

Arrow Electronics introduced Tenable Network Security to local resellers in Sydney last week, officially launching the distributor's latest security partnership across Australia and New Zealand. Representing the first direct distribution agreement locally for Tenable specifically, the deal sees Arrow deliver security solutions directly to mid-market and enterprise channel partners on both sides of the Tasman.

Arrow exclusively introduces Tenable Network Security to A/NZ channel
Show Comments