Menu
Sharp's robotic cleaner will make solar panels sparkle

Sharp's robotic cleaner will make solar panels sparkle

The system has been tested in Thailand and saves labor and water

Sharp's automatic solar panel cleaner on show at Ceatec 2013 in Japan on October 1, 2013.

Sharp's automatic solar panel cleaner on show at Ceatec 2013 in Japan on October 1, 2013.

It might not be immediately obvious, but with every solar panel installed comes a simple but essential piece of maintenance: regular cleaning.

Just like the windows on your house, the glass on the top of solar panels gets coated with dust and dirt that cuts down the amount of light that passes through. More so than windows, solar panels are particularly vulnerable because they often lie at a shallow angle in an exposed location.

A thin layer of dust and grime can reduce efficiency by around 15 percent -- that's a lot of potential power to waste just because the glass isn't kept clean.

So Japan's Sharp, a leading manufacturer of solar panels and generation systems, has come up with a robotic answer to this problem. The company has developed an automatic cleaner that will latch on to the top of a bank of solar panels and clean them one by one.

The device, which is on show at this week's Ceatec expo in Tokyo, can clean about 1,800 panels per hour. It requires a two-person team to operate and will cover around 5,220 panels before its battery runs dead, the company said.

In contrast, current manual cleaning requires a 10-person team that can get through about 7,380 panels per day, so the automatic cleaner is much more efficient.

Sharp has already conducted trials of the cleaner at Thailand's Changwat Lop Buri. The plant is one of the largest solar generation facilities in the world, covering an area of 2 kilometers by 1 kilometer, and contains 640,000 solar panels to produce up to 73 megawatts of electricity.

By hand, cleaning all those panels was a three-week job that required 62 workers. Using the solar cleaner, the job was accomplished in the same amount of time using about 20 workers, Sharp said.

In addition to requiring fewer workers, it also consumes just one-tenth the amount of water of the manual cleaning process -- about 0.3 liters per panel.

Sharp is working toward commercializing the cleaner, which will first work on the company's own panels. Adapting it to clean solar panels made by different companies shouldn't be difficult, and Sharp will consider that after initial commercialization, said Akimasa Umemoto, a department general manager at Sharp's Solar Systems Group.

Sharp is already working on a next-generation system that doesn't require water. While the current prototype is suitable for use in Southeast Asian countries and places such as the U.S., the waterless version will be aimed at the Middle East, where access to large amounts of water can be problematic.

Martyn Williams covers mobile telecoms, Silicon Valley and general technology breaking news for The IDG News Service. Follow Martyn on Twitter at @martyn_williams. Martyn's e-mail address is martyn_williams@idg.com

Follow Us

Join the New Zealand Reseller News newsletter!

Error: Please check your email address.

Tags sharproboticsindustry verticalsCEATECenergy

Featured

Slideshows

Educating from the epicentre - Why distributors are the pulse checkers of the channel

Educating from the epicentre - Why distributors are the pulse checkers of the channel

​As the channel changes and industry voices deepen, the need for clarity and insight heightens. Market misconceptions talk of an “under pressure” distribution space, with competitors in that fateful “race for relevance” across New Zealand. Amidst the cliched assumptions however, distribution is once again showing its strength, as a force to be listened to, rather than questioned. Traditionally, the role was born out of a need for vendors and resellers to find one another, acting as a bridge between the testing lab and the marketplace. Yet despite new technologies and business approaches shaking the channel to its very core, distributors remain tied to the epicentre - providing the voice of reason amidst a seismic industry shift. In looking across both sides of the vendor and partner fences, the middle concept of the three-tier chain remains centrally placed to understand the metrics of two differing worlds, as the continual pulse checkers of the local channel. This exclusive Reseller News Roundtable, in association with Dicker Data and rhipe, examined the pivotal role of distribution in understanding the health of the channel, educating from the epicentre as the market transforms at a rapid rate.

Educating from the epicentre - Why distributors are the pulse checkers of the channel
Kiwi channel reunites as After Hours kicks off 2017

Kiwi channel reunites as After Hours kicks off 2017

After Hours made a welcome return to the channel social calendar last night, with a bumper crowd of distributors, vendors and resellers descending on The Jefferson in Auckland to kickstart 2017. Photos by Maria Stefina.

Kiwi channel reunites as After Hours kicks off 2017
Arrow exclusively introduces Tenable Network Security to A/NZ channel

Arrow exclusively introduces Tenable Network Security to A/NZ channel

Arrow Electronics introduced Tenable Network Security to local resellers in Sydney last week, officially launching the distributor's latest security partnership across Australia and New Zealand. Representing the first direct distribution agreement locally for Tenable specifically, the deal sees Arrow deliver security solutions directly to mid-market and enterprise channel partners on both sides of the Tasman.

Arrow exclusively introduces Tenable Network Security to A/NZ channel
Show Comments